Safety Tips While Using Cutting Tools

Posted by Admin on September, 18, 2013

Cutting Tools are sharp and powered tools that are extensively used. Safety precautions should be taken while using them. If not handled properly, these sharp tools may cause cuts and prick your wounds. It is very necessary that Cutting Tools should be inspected, maintained and sharpened with great precaution. While using some Cutting Tools, workers need to wear personal protective equipment (PPE) like well-fitting gloves and safety glasses. Read further tio know more about Safety Tips While Using Cutting Tools.


Safety Tips While Using Cutting Tools

Following the below written safety tips will ensure safe use of Cutting Tools:

  • Cutting Tool should always be used away from the body and face.
  • While using Cutting Tool with one hand, it should be known at all times where the other hand is.
  • When a Cutting Tool has dropped, it should be allowed to fall keeping the legs and feet completely away from its way.
  • Blade should be inspected regularly for any crack, overheating or damage.
  • Manufacturer’s instructions should be followed regarding the blade specific usage.
  • Manufacturer’s recommendations regarding saw type, coolant, blade shaft speed, etc. should be followed.
  • It should be ensured that the blade size is perfect for the type of saw that is to be used.

Are you in search of the best quality Customized Cutting Tools that can give you complete worth for your money? If yes, then trust none other than the best- Get Cutting Tools. The company is a well-reckoned Pune (Maharashtra) based Manufacturer, Exporter and Supplier of huge assortment of Cutting Tools. Its product catalogue comprises of Carbide Brazed Cutting Tools, End Mill Cutters, Face Mill Cutters, Gear Cutters, Reamer Tools, Side and Face Cutters, Slitting Cutters, Indexable Insert Combination Cutter, etc. The company also offers other products like Carbide Inserts, Industrial Drill Bits, Micro Boring Bars, Micro Boring Cartridges, Roller Burnishing Tools, Diamond Dresser and U Drills. To know more, just log onto company’s website http://www.getcuttingtools.co.in/.



This entry was posted on September, 18, 2013 at 12 : 52 pm and is filed under Cutting Tools. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.

Leave a Comment

(required)
(required) (will not be published)

Contact Now

+91-9890960067