Drilling Tools

These tools are used to generate internal thread (taps) in any material. We offer these tools from size Ø8 mm up to 50 mm with different tolerance like 2G, 3G, etc. Our  taps are manufactured in various material like HSS- M2, M35.    We offer :- Left hand tap. Right hand tap. Multi start thread tap – 2 start, 3 start, 4 start, 6 start.. Fine pitch. Course pitch. Tandem tap- two different sizes with same pitch.  Trapazoidal tap.

Material : M35

Thickness : 10-15mm

Application : Fittings

Grade : HSS

Finishing : Polished

Size : 8 Mm Up to 50 Mm

Tolerance : 2g, 3g, Etc

We offer router bits for CNC router machine, Hand router machine. These tools are used on wood and plastic material.

Material : Metal

Application : Fittings Use

Feature : Durable, Easy To Fit, Fine Finished, Non Breakable, Rust Proof

Finishing : Polished

Clolor : Silver

Packaging Details : Plastic Box

We offer complete deburring solutions. Our tools can be used for cross hole deburring, external diameter and internal diameter deburring of pipe, edge deburring, etc.   We can provide deburring tools for as small as diameter 2 mm.  Our tools can be used on any drilling machine or cnc machine.   Area of application : Hydraulic valves Hydraulic fittings Hydraulic cylinders Engines Turned components Machined components

Material : Metal

Application : Trimming

Color : Silver

Feature : Corrosion Ressistance, Durable Nature, High Performance, Longer Life Service

Finishing : Polished

Automatic Grade : Manual

Packaging Type : Box

Diamond Burnishing Tool is a non-cutting machining process to produce mirror-like surface finish with low surface roughness of Ra-0.05um to Ra-0.35um, consistently accurate size and increased hardness of the skin layer. It is a type of cold working process where it removes the surface undulations generated after machining on metal by compressing the peaks of a metal's surface into the valleys like "ironing".   It is used where a hole is required to be increased in size by few microns which cannot be achieved by machining process like boring and also improve its surface finish, cylindricity and surface hardness.   Following are types of applications for which we offer the tools : Taper hole Straight Shaft. Taper Shaft Corner radius. Spherical surface   For any other application, will be manufactured against order.

Material : Metal

Thickness : 0-10mm

Color : Black

Coating : Powder Coated

Country of Origin : India

Application : Diamond Cutting

Features : High Grade Material, Anti Abrasive

We offer complete solution in drilling with high performance hss drill, TCT drill and U drill, spade drill for CNC turning, Vertical Machining Centre, Horizontal Machining Centre of various capacities for machining of alloy steel, stainless steel.   These cutters are particularly designed for obtaining : High production rates. Higher degree of consistency and accuracy in components.   We offer the U drills in sizes from Dia.10 mm up to Dia.80 mm with or without thru coolant design. We also offer U drills with higher L/D ratio.   These products are designed & manufactured to suit standard ISO inserts of any reputed make from Sandvik, Iscar, Widia, Kennametal, Taegutec, etc. All these U drills are designed to sustain stability at high machining parameters. Accordingly, the steel used are of high grade alloy steel duly heat treated. All the cutting edges are maintained at optimum geometry on special machines to suit ISO inserts of every make. This helps to achieve uniform wear of carbide inserts, reduce vibration and load on the machine spindles, and easy cutting.

Material : Metal

Color : Grey

Surface Finishing : Polished

Corrosion Resistance : Yes

Usage : Industrial

Specialities : Sharp Edge, Rust Proof, High Strength, Easy Fitting, Accuracy

Packaging Type : Carton Box

We offer complete range of hss micro drill, The diameter range starts from Dia. 0.2 mm onwards.

Material : HSS Steel

Color : Grey

Feature : Sharp Edge, Rust Proof, High Grade, Heat Resistance, Easy Fitting, Accuracy

Surface Finishing : Coated

Size : Micro

Application : Industrial

Dia. : 0.2 mm

We offer thru coolant taps for deep hole tapping on CNC or special purpose machine. We offer these tools from size Ø8 mm up to 50 mm with different tolerance.   Our taps are manufactured in various material like HSS- M2, M35.    We offer : Left hand tap. Right hand tap. Multi start thread tap – 2 start, 3 start, 4 start, 6 start. Screw Thread Insert tap. Fine pitch. Course pitch. Tandem tap- two different sizes with same pitch. Metric tap. Inch tap- BSP, BSF, UNF, UNC. NPSM tap. NPT tap. Roll tap ( fluteless/roll form tap).

Material : HSS

Thickness : 1-5mm

Application : Industrial

Color : Grey

Surface Treatment : Polished

Standard : M2, M35

These tools are used on CNC, conventional or special purpose horizontal or vertical boring machine, of various capacities for machining of holes from Ø8 mm upto 300 mm of perfect size (bearing sizes) with close tolerance.   We offer these tool in : Indexable insert integral holder. Indexable insert modular holder.   All these tools are dynamically balanced & designed to operate at optimum speed. We offer these tools with adjustable micro boring Unit with least count of 0.002 mm, 0.005 mm, 0.01 mm. These products are designed & manufactured to suit standard ISO inserts.   The holders are ISO tapers, BT-40 tapers, BT-50 tapers, HSK tapers.

Shape : Round

Color : Black

Condition : New

Finishing : Polished

Country of Origin : India

Material : Metal

Application : Industrial

We offer micro boring unit or Fine boring unit required for boring tools used on CNC, conventional or special purpose machines of various capacities for machining of fine boring in the metal.   We offer micro boring unit in : 0.01 mm least count accuracy 0.005 mm least count accuracy 0.002 mm least count accuracy

Shape : Hexagonal

Color : Black

Condition : New

Finishing : Polished

Material : Metal

Application : Industrial

We offer multi start taps from size Ø8 mm up to 40 mm with different tolerance. Our range includes 2 start, 3 start, 4 start, 6 start, 8 start, 10 start.   Our taps are manufactured in various material like HSS- M2, M35, ASP30.   We offer : Left hand tap. Right hand tap. Fine pitch. Course pitch. Metric tap. Inch tap- BSP, BSF, UNF, UNC. NPSM tap

Material : HSS

Thickness : 5-10mm

Application : Industrial

Grade : M2, M35, ASP30

Finishing : Polished

Range : Multi Start

Roller Burnishing Tool is a non-cutting machining process to produce mirror-like surface finish with low surface roughness of Ra-0.05um to Ra-0.35um, consistently accurate size and increased hardness of the skin layer. It is a type of cold working process where it removes the surface undulations generated after machining on metal by compressing the peaks of a metal's surface into the valleys like "ironing".   It is used where a hole is required to be increased in size by few microns where it cannot be achieved by machining process like boring and also improve its surface finish, cylindricity and surface hardness.    Following are types of applications for which we offer the tools-  Through hole Shaft Taper hole Surface Groove Threads   For any other application, will be manufactured against order.

Material : Iron

Color : Silver

Coating : Chemical Coated

Application : Industrial

Surface Roughness : Ra-0.05um to Ra-0.35um

Features : Quality tested., High work capacity, Easily operate